| Model SEPS | 50112 |
| Rated Power | 500W |
| Peak Power(20ms) | 1500W |
| Start Motor | 0.5HP |
| Battery Voltage | 12VDC |
| Inside Battery Capacity | 200Ah*1 |
| Size(L*W*Hmm) | 600*300*495 |
| Package Size (L*W*Hmm) | 660*360*620 |
| N.W.(kg) Without Battery | 27 |
| G.W.(kg) Without Battery Carton Packing | 30 |
| Installation Method | Tower |
| Parameter |
| Input | DC Input Voltage Range | 10.5-15VDC(Single battery voltage) |
| AC Input Voltage Range | 73VAC~138VAC / 145VAC~275VAC |
| AC Input Frequency Range | 45Hz~65Hz |
| Max AC charging current | 6A~15A (Depending on the model) |
| AC charging voltage | LEAD battery:Charge Voltage :14V; Float Voltage:13.8V(Single battery voltage) |
| AC charging method | Three-stage (constant current, constant voltage, floating charge) |
| Output | Efficiency(Battery Mode) | ≥85% |
| Output Voltage(Battery Mode) | 110VAC±2% / 220VAC±2% |
| Output Frequency(Battery Mode) | 50/60Hz±1% |
| Output Wave(Battery Mode) | Pure Sine Wave |
| Efficiency(AC Mode) | >99% |
| Output Voltage(AC Mode) | 110VAC±10% / 220VAC±10% |
| Output Frequency(AC Mode) | Tracking Automatically |
| Output waveform distortion(Battery Mode) | ≤3%(Linear load) |
| No load loss(Battery Mode) | ≤1% rated power |
| No load loss(AC Mode) | ≤2% rated power( charger does not work in AC mode) |
| No load loss(Energy saving Mode) | ≤10W |
| Battery Type | Customize battery | Charge and discharge parameters of different types of batteries
(such as lithium batteries, etc.)
can be customized according to user requirements |
| Protection | Battery undervoltage alarm | 11V(Single battery voltage) |
| Battery undervoltage protection | 10.5V(Single battery voltage) |
| Battery overvoltage alarm | 15V(Single battery voltage) |
| Battery overvoltage protection | 17V(Single battery voltage) |
| Battery overvoltage recovery voltage | 14.5V(Single battery voltage) |
| Overload power protection | Automatic protection (battery mode), circuit breaker or insurance
(AC mode) |
| Output short circuit protection | Automatic protection (battery mode), circuit breaker or insurance
(AC mode) |
| Temperature protection | >90°C(Shut down output) |
| Alarm | A | Normal working condition, buzzer has no alarm sound |
| B | Buzzer sounds 4 times per second when battery failure, voltage
abnormality, overload protection |
| C | When the machine is turned on for the first time, the buzzer will
prompt 5 when the machine is normal |
Inside Solar controller
(Optional) | Charging Mode | MPPT or PWM |
| Charging current | 10A/20A/30A/40A/50A/60A |
| PV Input Voltage Range | PWM: 15V-44V / MPPT: 15V-120V |
Max PV Input Voltage
(At the lowest temperature) | PWM: 50V / MPPT: 150V |
| PV Array Maximum Power | 140W(10A)/280W(20A)/420W(30A)/560W(40A)/700W(50A)/840W(60A) |
| Standby loss | ≤3W |
| Maximum conversion efficiency | >95% |
| Working Mode | Battery First/AC First/Saving Energy Mode |
| Transfer Time | ≤4ms |
| Display | LCD |
| Thermal method | Cooling fan in intelligent control |
| Communication | RS232(Optional) |
| Environment | Operating temperature | -10℃~40℃ |
| Storage temperature | -15℃~60℃ |
| Noise | ≤55dB |
| Elevation | 2000m(More than derating) |
| Humidity | 0%~95% ,No condensation |
| Warranty | 1 year |
